Big or Small Scratches from Your Stainless Steel Surface? Here is How to Remove Them

Stainless steel is popular for the sleek and modern edge it adds to your property, as well as its corrosion resistance. The material might not catch stains, but it can start to get scratches after years of use. Fortunately, you can get rid of the scratches. This blog will discuss how to remove scratches from stainless steel.

Remove Small or Big Scratches from Stainless Steel

Your stainless steel can get light, small scratches or visibly big ones. How you remove the scratches from stainless steel depends on their appearance and size, and you will also pick the appropriate method accordingly.
Before proceeding, look closely at the surface to see the fine brush lines going either side to side or up and down. This is the direction of the grain, and you should work along it for effective results. Avoid rubbing perpendicular to the grain or circular motion, as it can cause damage.

The methods are given below:

1. Remove Small Scratches from Stainless Steel

You will need a stainless steel scratch remover compound and a microfiber cloth to remove minor nicks. Moreover, household products like non-gel toothpaste and baking soda.

Mix the compound with water if it is in powder form. If you are using baking soda, mix it with water to make a paste. Non-gel toothpaste and paste compounds can be used as-is. Then:

  • Clean the surface of contaminants and food particles
  • Dab some compound on a microfiber cloth and rub it gently on the scratch.
  • Make sure your movements are continuous and in the direction of the grain.
  • After rubbing for a few minutes, use another damp microfiber cloth to wipe the surface.
  • Examine the scratch and polish again if needed. Continue until you are satisfied.
  • Clean the excess compound off with a wet cloth.
  • Use another fresh microfiber cloth to dry the surface.

2. Remove Big Scratches From Stainless Steel

To get rid of tough and deep scratches on stainless steel, you will need an abrasive pad. A scrubbing sponge or scouring pad and Olive oil or another cooking oil are essential for removing deep scratches. Or you can go for the kit available in the markets. However, this method will work for uncoated stainless steel, as a coated or synthetic metal surface might get damaged.
First, try rubbing the compound. If it does not work, you will need a scouring pad to buff the prominent scratches. The method is as follows:

  1. Pour two drops of oil into the pad.
  2. Apply moderate but firm pressure to rub the surface in the direction of grains.
  3. To achieve a uniform appearance, scrub on a larger area than the scratch mark.
  4. Examine the site and keep working until you are pleased with the appearance.
  5. Remove the excess oil on the surface by buffing a clean, dry microfiber cloth on the spot.

The Final Takeaway

The nicks and scrapes on your otherwise perfect stainless steel surface can ruin its appearance. Now that you know how to remove scratches from stainless steel say adios to the dull surface and get to work. In addition, if you want more steel supplies, get the best from Fort Bend & Steel Supply. Reach out to us at 281-499-5800.

Skip to content